Job by sector
Engineering Jobs
Total jobs: 37
Mechanical Service Technician
Posted: 21/02/2012
Perth | Temporary
£21,500
Our client who is a Market Leader in the Water Industry is seeking a skilled Mechanical Service TEchnician to join there business on a 6 month Fixed term Contract
Responsible for the installation, servicing and refurbishment of wastewater treatment equipment
You will be a skilled mechanical fitter ideally from a plant maintenance background with welding skills
The work will entail covering various sites throughout Scotland so you will need to be flexible in your working approach
You must hold a full clean driving licence and be IT Lietrate
To be considered please apply with a full CV in Word format
More InformationAuto Electricians
Posted: 03/02/2012
Doncaster, Mansfield, Rotherham, Chesterfield | Temporary
£0
Our client is a well established commercial vehicle manufacturing company. Due to a large order, we require 12 x Auto Electricians to work on large new build refuse vehicles. Duties will include fitting wiring looms and plc controls for lifting wheelie bins. You will be following detailed 3D schematic drawings and you will also be required to do some hydraulic hose fitting work.
This is a 6 month contract with immediate starts available.
Please forward CV’s for a quick response.
Hours: Days
Workshop opening times: Mon-Thurs (6am-6pm) Fri (6am-4.30pm) Sat (6am-12pm)
More InformationFabricators
Posted: 03/02/2012
Doncaster, Sheffield, Rotherham, Mansfield | Temporary
£0
Our client is a well established commercial vehicle manufacturing company. Due to a large order, we require 18 x Fabricators who are time served, apprentice trained and who can read and understand 3D schematic drawings.
You will be expected to work a 40 hour week with 10 – 20 hours overtime available each week. You will be working on a production line so previous experience of commercial vehicle fabrication would be an advantage.
This is a 6 month contract with immediate starts available.
Please forward CV’s for a quick response.
Hours: Days
Workshop opening times: Mon-Thurs (6am-6pm) Fri (6am-4.30pm) Sat (6am-12pm)
More InformationSpares & Retrofit Production Scheduler
Posted: 25/01/2012
Leeds | Permanent
£27,000 - £30,000
Responsibility for scheduling work through the Parts manufacturing centre for Spares, Retrofit and Service Centres.
More InformationEngineering Inspector
Posted: 25/01/2012
North Yorkshire | Permanent
£0
My Client is looking for a hard working customer focused individual to become part of the massive expansion experienced by the business during recent years.
The inspector must be experienced in working in a BS EN ISO 9001 environment, and will report to the Quality Manager. The inspector will be responsible mainly for the mechanical engineering inspection of precision machined components, but also including castings, forgings, welded fabrications etc., at all inspection stages:-
•Goods inwards inspection.
•Stage inspection.
•Final pre-delivery inspections.
The inspector will also:-
•Produce inspection reports
•Carry out investigations into quality problems and provide advice on possible corrective action
•Ensure that measuring equipment is maintained in a known state of calibration
Key Skills
My client are currently commissioning a new inspection room equipped with two Mitutoyo CMM machines. Experience in operating this high precision equipment would be an asset although training will be provided.
The successful candidate will:
•Be a qualified, time served, mechanical engineer
•Be competent in the use of a wide range of precision measuring equipment including; digital height gauges and Faro arms
•Fully conversant with engineering drawings and conventions
•Aware of the application and interpretation of British and international standards relating to dimensional accuracy, surface finish and integrity of mechanical engineering components and welded fabrications
•Conversant with a wide range of material specifications and associated certification
•Demonstrate an ability to plan, co-ordinate and organise work and inspection procedures
•Have an ability to maintain deadlines under pressure
•Awareness of BS EN ISO 9001 requirements
•Have excellent verbal and written communication skills
Manual Machinist x 3
Posted: 24/01/2012
South Yorkshire | Permanent
11.84 per hour
EXCITING NEW OPPORTUNITIES AVAILABLE FOR: 1 *Apprentice Trained Manual Machinist with milling and centre lathe turning experience. 2* General Machinist with Vertical Turret Lathe Experience. I am looking for candidates with a heavy industry background. The Hours of work; Day Shift ? 5 shifts Monday to Thursday, 7.30 am to 4.00 pm - 30 min unpaid meal break Friday 7.30 am to 12.30 pm Excellent Hourly Rate, with time and a half for overtime plus 34days paid holidays.
More InformationCNC OPERATOR
Posted: 23/01/2012
BARNSLEY | Permanent
£6.50-8.50
CNC OPERATOR
BARNSLEY
TEMP TO PERM
CNC PROGRAMMER / MANUFACTURING ENGINEER
Posted: 23/01/2012
ROTHERHAM | Permanent
£27-30K
CNC PROGRAMMER / MANUFACTURING ENGINEER
PRECISION ENGINEERING
ROTHERHAM
PERMANENT POSITION
CNC MILLER
Posted: 23/01/2012
ROTHERHAM | Permanent
£11.00 PLUS SHIFT ALLOWANCE
CNC MILLER
ROTHERHAM
DAYS AND NIGHTS
TEMP TO PERM
Finishing Operative
Posted: 23/01/2012
Barnsley | Permanent
£6.50 - £8.50 Per hour
Finishing Operative
Barnlsey Area
Temp to Perm
£6.50 - 8.50 per hour
